Berne's new tram depot: first class solar system from Lyss
3S Photovoltaics, a member of the Meyer Burger Technology Group (ticker: MBTN), has supplied cutting edge solar technology for Berne's tram depot. This system, specially developed for the building, not only performs well but fits in well aesthetically with the overall architecture.
For the tram depot project, 3S Photovoltaics picked up the challenge set by the planners and architects and developed a special module. Adapting module design to a specific building project is one of 3S Photovoltaics' major strengths. The 1,120 frameless solar modules were manufactured with ultra-robust 10 mm cover glass so that they can be walked on while at the same time being easy to install with just 4 fastening points.
Optimum use is made of the available roof area for power generation. The solar power system has an installed total power output approaching 300 kilowatt peak (maximum power output of the photovoltaic modules).
The solar modules are installed on thirteen gable structures on the roof. The solar power system, which faces south-east, is forecast to supply an annual power output of around 260,000 kWh, approximately corresponding to the annual energy consumption of 60 single-family homes.
The advanced module design with thick cover glass and without a metal frame stops dirt from building up around the edges of the module. This means that they are almost entirely self-cleaning, so combining the highest possible energy yields over the long term with the least possible maintenance effort.
The new system was installed by BE Netz AG. Energie Wasser Bern, the local power and water utility, will purchase the solar electricity which is generated.
For further information, please contact:
Sandro Spichiger
3S Photovoltaics
Tel. +41 (0) 32 391 1318
sandro.spichiger@3s-pv.ch
www.3s-pv.ch
Dr. Anja Knaus
Meyer Burger Technology AG
Tel: +41 (0) 33 439 38 72
anja.knaus@meyerburger.com
www.meyerburger.com
About Meyer Burger Technology Ltd
www.meyerburger.com
Meyer Burger is one of the world’s leading providers of innovative systems and production lines for photovoltaics in the solar industry and for the semiconductor and optoelectronic industries. Highly efficient wafers made from silicon, sapphire and other crystals are required in these three markets to manufacture solar modules, switching circuits or high-performance LEDs. The Group’s core competences encompass a broad range of production processes, machines and systems that are used for the production of ultra-thin, high quality wafers, for the inspection and measurement of solar cells, for laminating, soldering and testing of solar module and for building-integrated solar systems. With the acquisition of Roth & Rau AG, with its cutting-edge products and technologies for the next generation of crystalline silicon solar cells, Meyer Burger Group is further expanding its market leadership along the entire photovoltaics value chain. The merger of the two companies creates a full-line system provider which covers the most important technology elements in the photovoltaics value chain, from crystalline silicon to complete solar systems, specifically in the production processes of wafering, solar cells and solar modules. The Group’s comprehensive range of products includes a worldwide service network with wear and tear parts, consumables, re-grooving services, process know-how, servicing, after-sales services, training and other services. As a globally active company, Meyer Burger Group is represented in Europe, Asia and North America in the respective key markets and has over 2,500 employees since the Group’s expansion in August 2011.
Meyer Burger has its headquarters and the production facility of MB Wafertec (Meyer Burger Ltd) in Switzerland, while the group companies, Meyer Burger Automation GmbH, Hennecke Systems GmbH and AMB Apparate + Maschinenbau GmbH have their headquarters and production facilities in Germany. Diamond Wire Materials Tech, Inc. has its headquarters in Colorado Springs, CO, USA. The production facilities of 3S Modultec, 3S Photovoltaics and Pasan are also located in Switzerland, while Somont is located in Germany. The recently integrated Roth & Rau Group has its headquarters in Hohenstein-Ernstthal in Germany and has subsidiaries in Germany, Italy, the Netherlands, USA and various far Eastern countries. The entire Meyer Burger Group has subsidiaries and own service centres in Germany, Norway, Spain, USA, China, Japan, Singapore, South Korea, Taiwan and India. In other important markets, the Company relies on selected independent agents. The registered shares of Meyer Burger Technology Ltd are listed on SIX Swiss Exchange (Ticker: MBTN).
About 3S Swiss Solar Systems AG
www.3s-pv.ch; www.3-s.ch
3S Swiss Solar Systems has for many years been the world's technological market leader in production systems for manufacturing solar modules. Using integrated production lines and fully automated laminating lines supplied by this Swiss company, module manufacturers around the globe are today producing photovoltaic modules of the highest quality. Equipment for solar module producers is being marketed under the newly introduced 3S Modultec brand. The company also develops and manufactures trend-setting, building-integrated solar systems under the newly introduced brand 3S Photovoltaics, specialising in solar modules for roofs, facades and shading solutions. These solar modules are manufactured in Lyss, close to Berne, and ideally combine the functions of a robust, weatherproof building shell and efficient, environmentally friendly power generation.
3S Swiss Solar Systems with its brands 3S Modultec – Module Solutions and 3S Photovoltaics – Solar Building Technologies is part of the Meyer Burger Technology Group.
THIS PRESS RELEASE IS NOT BEING ISSUED IN THE UNITED STATES OF AMERICA AND SHOULD NOT BE DISTRIBUTED TO U.S. PERSONS OR PUBLICATIONS WITH A GENERAL CIRCULATION IN THE UNITED STATES. THIS PRESS RELEASE DOES NOT CONSTITUTE AN OFFER OR INVITATION TO SUBSCRIBE FOR, EXCHANGE OR PURCHASE ANY SECURITIES. IN ADDITION, THE SECURITIES OF MEYER BURGER TECHNOLOGY LTD HAVE NOT BEEN AND WILL NOT BE REGISTERED UNDER THE UNITED STATES SECURITIES ACT OF 1933, AS AMENDED (THE “SECURITIES ACT”), OR ANY STATE SECURITIES LAWS AND MAY NOT BE OFFERED, SOLD OR DELIVERED WITHIN THE UNITED STATES OR TO U.S. PERSONS ABSENT REGISTRATION UNDER OR AN APPLICABLE EXEMPTION FROM THE REGISTRATION REQUIREMENTS OF THE UNITED STATES SECURITIES LAWS.
This press release may contain “forward-looking statements”, such as guidance, expectations, plans, intentions, or strategies regarding the future. These forward-looking statements are subject to risks and uncertainties. The reader is cautioned that actual future results may differ from those expressed in or implied by the statements, which constitute projections of possible developments. All forward-looking statements included in this press release are based on data available to Meyer Burger Technology Ltd as of the date that this press release is published. The Company does not undertake any obligation to update any forward-looking statements contained in this press release as a result of new information, future events or otherwise.
Press Release
